The 6-axis machining center is equipped for the production of micro cutting edges and final finishprocessing with many technical features.
6 controlled servo axes
Cutting edges
Cutting edges
The following operations can be performed with the center:
Micro cutting edges preparation on main edges
Micro cutting edges preparation on corner edges
Micro cutting edges preparation on secondary edges
Polishing of circumferential flutes
Combined multiple machining on shaft tools
Micro cutting production on tap
Advantages of micro-cutting edge preparation by FLAKKOTING
- Different micro cutting edges can be produced on the face cutting edges from the center to the corner cutting edge.
- Different K-factors up to KF 3.5 (radii, trumpet, waterfall) can be reliably produced on allcutting edges.
- K-factors up to KF 3.5 are possible on the peripheral cutting edges.
- Corner cutting edges are not machined more by FLAKKOTING than by all other processes.
- Flutes can also be polished.
- Polishing of hard coatings with droplet removal.
- Optionally also available for wet machining.