Machine longer.
Less carbide.

Cutting edges that last 60 % longer — reproducible on every cutting edge, in your grinding machine or in the K2E.

What the edge is worth Send a sample
Treated by FLAKKOTING vs. untreated

The difference at the edge

3D rendering: sharp-ground carbide cutting edge with micro-chipping
Without preparationGround sharp, cutting edge ≈ 3 µm: the edge is brittle and chips off in micro particles on entry. 3D rendering based on the measured values of the presentation, not a photo.
3D rendering: the same carbide cutting edge after FLAKKOTING, radius 30 µm, polished rounding
Treated by FLAKKOTINGThe same cutting edge, radius 30 µm, the rounding polished, the ground surface unchanged — cold, without chemicals, the same on every cutting edge. Same camera, same light.
Process-reliable high-performance machining
without
FLAKKOTING
constant
Uniform engagement on every cutting edge, stable process forces, higher feed rates possible — process-reliable even at high cutting speeds. The production machine runs constantly instead of unstably.
Tool life
without
FLAKKOTING
+60%
No micro-chipping on entry: wear sets in later and progresses evenly. +60 % in the customer test of a major tool manufacturer — the technical literature states +20 to +100 %.
Surface
without
FLAKKOTING
cleaner
A stable cutting edge cuts smoothly: uniform surfaces without chipping marks — Ra −30 % measured in drilling. Predictable wear instead of edge fracture means less rework and less scrap in production.

The proof What the edge is worth

Why the edge

Every workpiece is raw material

Tungsten and cobalt are not getting cheaper. Anyone who manufactures or regrinds drills and milling cutters now buys tungsten carbide at a multiple of the price of early 2026.

The biggest lever is not in purchasing but at the cutting edge: a sharply ground carbide edge chips microscopically at the first engagement. An edge rounded to a defined radius does not — it cuts evenly, wears later and lasts longer.

Fewer cutting tools – fewer regrinding cycles – less scrap. That is sustainability that pays off.

Sustainable machining
Burr on the cutting edge of a carbide cutting tool, microscope image by PROFIN
Without preparation: burr and chipping on the ground cutting edge (microscope image by PROFIN).
×10since Jan. 2025
That is how much more expensive tungsten, the raw material of carbide, has become — at least threefold since January 2026 alone.
1,100CHF on average
Is what a standard solid carbide cutting tool costs — range CHF 200 to 2,000. Every one that lasts longer counts.
10– 40 s
Is how long edge preparation takes per workpiece — directly in your grinding machine.
Resources = PRO environment

The same work. One third fewer cutting tools.

60 % longer tool life means: the same machining volume takes only 62.5 cutting tools instead of 100. Every cutting tool saved is not bought, not reground, not transported and causes no production stoppages.

Carbide
−37%
less tungsten carbide and cobalt purchased — at a tungsten price that has increased tenfold since January 2025 — and at least tripled since January 2026 alone.
Regrinding
×1.6
longer interval until the next regrinding: fewer cycles, less grinding dust, fewer transports — and, reground with a FLAKKOTING-treated edge, back at new-tool level.
Process
cold
The process is cold, dry, without chemicals — or wet. No thermal damage to the carbide, no baths, no disposal.
PRO environment · PRO costing

One edge, two winners

The benefit is shared. Whoever manufactures or regrinds cutting tools sells a documented edge. Whoever machines with FLAKKOTING-treated cutting tools changes tools less often, has less downtime and produces less scrap.

For the tool manufacturerGrinding, regrinding, selling
  • One third less carbide for the same machining work at the customer: 100 cutting tools become 62.5.
  • Less scrap in your own production: a defined edge instead of a jagged one, every cutting edge the same — commercially available inserts vary by 20 to 50 µm along one cutting edge.
  • A sales argument with a figure: radius, K-factor and tool life documented per workpiece. The data sheet replaces the promise.
  • Regrinding at new-tool level: the reground drill gets the same edge as the new one.
For the userWhoever machines with FLAKKOTING-treated cutting tools
  • +60 % tool life in the customer test, up to +100 % in the technical literature: fewer tool changes, less downtime.
  • Predictable wear instead of edge fracture: the change of cutting tools can be scheduled, less scrap and rework on the component.
  • Process-reliable at high cutting values: uniform surfaces without chipping marks, Ra −30 % measured in drilling.
  • Less raw material per component: 37 % fewer cutting tools bought, stored, transported, disposed of.
Who it is for

Three routes to a better edge

Cutting tool manufacturers

Edge preparation directly in the grinding machine, 10–40 seconds per workpiece, parameters from MIKRO-KI.

More →

Regrinding shops & complex workpieces

Step drills, form milling cutters, taps: many cutting edges, different radii. The K2E prepares every cutting edge in a single clamping — 2–3 minutes per workpiece, reground as good as new.

More →

Machine builders & OEMs

You integrate FLAKKOTING into your grinding or handling machine. PROFIN supplies the FLAKKOTING tools, the process parameters and the MIKRO-KI model.

More →
How it works

Process, model, machine

FLAKKOTING

The cold ultra-fine grinding process with diamond filaments: radii from 5 to 50 µm, edge shape according to K-factor.

The process →

INNOFLAKK with MIKRO-KI

Enter the target radius and the workpiece — the model built from several thousand measured edges supplies the process parameters.

The model →
K2E Robo with robot, image by PROFIN

K2E family

The 6-axis centre for micro cutting edges on cutting tools — from manual operation to series production with a robot.

The machine →
Innovation project supported by Innosuisse inspire AGResearch partner affiliated with ETH Zurich Talks: Arbeitskreis Hartmetall 2026 · Schleifsymposium 2026

Send us a workpiece.

We prepare it, measure the edge and show you what the edge is worth in your process.

Tool sample processing

You send us your workpiece, we treat it by FLAKKOTING in the process laboratory in Littau and you receive the measured results: radius, K-factor and images of the edge. First results from approx. CHF 800, FLAKKOTING day with documentation on request.

Register a sample