FEM — linear system for indexable inserts
Prepare micro cutting edges, polish surfaces, remove droplets: up to 204 inserts in one mask, 180 to 240 seconds per mask.
Productivity redefined
The inserts lie in a mask, the FLAKKO unit travels over them in up to three stages — independent of geometry, with defined K-factor and tight tolerances.
- FLAKKO unit 3/2 Multi for 1- to 3-stage process, tool size 3 × Ø 230 mm
- Indexable inserts in tungsten carbide and CBN, ceramic with vacuum clamping, shapes 2D / 2.5D / 3D
- Brush trim measurement with Acoustic Emission System, automatic wear compensation
- Tool control with RFID, post-cleaning with rinsing, blow-off and extraction
- Operation via touch panel, remote maintenance, ERP connection for process data

FEM 1-3/2 in figures
| Base machine | Value |
|---|---|
| FLAKKO unit | 3/2 Multi, 1- to 3-stage process |
| Tool size | 3 × Ø 230 mm |
| Throughput CNMG 3 Ø | 102 sides per mask |
| Throughput CNMG 4 Ø | 240 sides per mask |
| Processing time | 180 to 240 s per mask |
| Transport table (X) | 1480 mm |
| FLAKKO unit (Z) | 160 mm |
Semi-automatic or fully automatic

Semi-automatic
Buffer unit for up to 12 pallets, turning unit and mask cleaning — or loading of the pallets by hand.

Fully automatic — ABE2D
Loading and unloading of tray stacks up to 600 mm high, mask trolley for 8 mask sets in mixed operation, vision and RFID job scan, turning for the second insert side.

Line
Several FEM with pallet and mask trolleys, integrated turning unit for double-sided processing — everything from a single source.
What is prepared in the FEM and the FUM
Indexable inserts in HSS and carbide, 3D inserts, twist drills, deep-hole drills, taps, end mills, plain milling cutters, reaming tools, circular saws — and precision components made of high-alloy and high-strength steels. Hard coatings are also polished and droplets removed.
The FUM 1-2/2 (YELLOWLINE) is the little sister of the FEM: a linear system with a two-stage unit and a circular unit for the same tasks.
Tool sample processing
You send us your workpiece, we treat it by FLAKKOTING in the process laboratory in Littau and you receive the measured results: radius, K-factor and images of the edge. First results from approx. CHF 800, FLAKKOTING day with documentation on request.

