LEM — precise deburring in continuous pass
Stamped and fine-blanked parts pass on the belt under up to four FLAKKO units: primary and secondary burrs gone, edges rounded, turned if required and processed again on the second side.
Deburring that readjusts itself
Modern deburring systems need fully automatic compensation — only then does quality stay constant without manual intervention. The LEM measures the belt loading and readjusts the tools dynamically.
- Modular design: up to four FLAKKO-type processing units, head and spindle speed variable
- Dynamic tool compensation with discontinuous belt loading, self-teach-in with program storage
- Turning concept for double-sided processing: return and turning device for magnetic workpieces
- Washing module with integrated demagnetisation, blow-off and onward transport
- Separated-compartment system: drive, control and electrics separated from the abrasive process
- Integration into existing production lines, infeed and outfeed systems can be supplied

LEM 300 · 400 · 500
| LEM 300 | LEM 400 | LEM 500 | |
|---|---|---|---|
| max. workpiece width | 280 mm | 380 mm | 480 mm |
| max. width turning station | 140 mm | 190 mm | 240 mm |
| max. workpiece height | 50 mm | 50 mm | 50 mm |
| FLAKKO type | 5-2 | 4-2 | 4-2 |
| FLAKKOTING tools per station | 5 | 4 | 4 |
| Tool diameter | 210 mm | 230 mm | 270 mm |
| Head drive power | 5.5 kW | 7.5 kW | 7.5 kW |
| Head speed | 10 – 350 rpm | ||
LEM, DLK and DLE
The LEM is the basis of the family; DLK and DLE are the more compact machines of the LEM for high performance in double transport and for secondary deburring directly at the grinding line.

LEM
Parts up to 200 (250) mm on both sides, up to 400 (500) mm on one side. Up to 9-stage processing with disc tools for grinding, brushing and polishing.

DLK
High-performance system with double transport and Quattro drive for high pull-through force: up to 200 mm on both sides, 400 mm on one side, reliably turned and repositioned.

DLE
Secondary deburring directly at the grinding line, on both sides — for face-ground or double-face-ground components such as pump parts.
Stamped parts that move on without rework
Sample processing of your parts
You send us a series of stamped or fine-blanked parts, we deburr them in the process laboratory in Littau, document edges and flatness and design the process for you — including infeed and outfeed. First results from approx. CHF 800, FLAKKOTING day with documentation on request.
